|
| |
| PRODUCT INFORMATION: POLYESTER RESIN STYRENE FREE (PESF) |
| |
|
| DESCRIPTION |
FEATURES |
| |
|
PESF Low Odour Resin is a high performance, rapid curing two part chemical anchoring system based on a modified Polyester resin in Methacrylate monomers. Applied in one single action this resin will produce a cost effective, strong, chemical resistant fixing. |
| |
| APPROVALS |
| |
|
|
- Non-flammable
- Very low odour
- Chemical resistance
- Suitable for close edge applications
- Suitable for use in concrete, brickwork, stone & hollow structures
- Suitable for fixing wall tiles, starter bars, studs, bolts & large screws
- Available in 300ml
|
 |
|
|
BASE
MATERIAL
TEMPERATURE
(°C) |
GEL
TIME
mins |
Min.
LOADING
TIME
mins |
| 25 |
3 |
30 |
| 15 |
6 |
35 |
| 5 |
12 |
50 |
| -5 |
50 |
90 |
|
|
|
| |
| |
| PERFORMANCE DATA AT STANDARD EMBEDMENT DEPTH |
| Concrete, f, ck, cube=30N/mm²(C20/25) |
Stud Thread
Size
(mm) (d) |
Hole Diameter
in Concrete (mm) (d0) |
Hole Diameter
in Fixture
(mm) (df) |
Standard Embedment
in Concrete
(mm) (b0) |
Recom-
mended
Torque
(Nm) (Tinst) |
Recommended
Load (kN) |
Characteristics
Edge Distance |
Characteristic Spacing |
Tension
(Nrec) |
Shear
(Vrec) |
Tension
(Ccr,N) |
Shear
(Ccr,V) |
|
| M8 |
10 |
9 |
80 |
11 |
5.8 |
5.8 |
80 |
100 |
100 |
| M10 |
12 |
11 |
90 |
22 |
8.1 |
8.9 |
90 |
130 |
130 |
| M12 |
14 |
13 |
110 |
38 |
11.6 |
13.2 |
110 |
150 |
150 |
| M16 |
18 |
17 |
125 |
95 |
19.8 |
23.9 |
130 |
170 |
170 |
| M20 |
24 |
22 |
170 |
170 |
29.1 |
38.2 |
150 |
190 |
210 |
| M24 |
28 |
26 |
210 |
260 |
33.1 |
54.7 |
190 |
240 |
240 |
|
| |
| |
 |
| |
| Storage |
|
Important |
Store in a dry area between 5°C and 25°C. Do not expose to direct sunlight. Storage at higher temperatures will reduce the shelf life. |
|
The information and data given is based on our own experience, research and testing and is believed to be reliable and accurate. However, as Alchem cannot know the varied uses to which its products may be applied, or the methods of application used, no warranty as to the fitness or suitability of its products is given or implied. It is the user’s responsibility to determine suitability of use. For further information please contact our Technical Department. |
|
| |
| |
|
 |
|
|
